Video to Frames

Pick a video below. It plays right here so you can find the part you care about, press Start here and Stop here, then choose how many frames you want. You'll get a zip of images, each one named after the second it came from.

Frame settings

You get a zip with every frame named by its time in the video, like frame-0004-00m03.0s.jpg. Up to 300 JPG or 120 PNG frames per run. Small videos are never stretched up.

Video to Frames

Extract frames from a video as JPG or PNG images: one every few seconds or a set number spread evenly, all in one zip. Works for mp4 to png, avi to jpg and MOV, MKV or WebM too.

Drag & Drop your MP4/MOV/M4V/WEBM/MKV/AVI file here

or click to browse (max 100MB)

Why pull frames out of a video at all

Most people land here with one of three jobs. They need a still for a thumbnail, a slide or a bug report. They need a stack of images from a clip to feed into something else, like a photogrammetry app, a training set or a flipbook. Or they recorded something on a phone and the one good moment only exists as video.

Pausing and hitting Print Screen works for one frame. It falls apart at ten, and at a hundred it's a lost afternoon. Screenshots also grab whatever is on top of the player: the progress bar, the cursor, a subtitle you didn't want. Pulling the frames straight from the video file gives you the real pixels at the real resolution, with nothing drawn over them.

I built this because the tools I tried kept getting one of the basics wrong. Some only spit out JPG. Some cap you at a handful of frames unless you pay. Almost all of them name the files 1.jpg, 2.jpg, 3.jpg, which tells you nothing once you've got 80 of them in a folder and need to know where frame 37 sits in the video.

How it works

You choose a video and it opens in a player on this page. That preview never leaves your computer. It's only there so you can scrub to the bit you want and set a start and end time with one click each. Leave the end empty and it runs to the end of the video.

When you hit convert, the file goes to our server and FFmpeg does the extraction. It seeks to your start time, picks frames at the spacing you asked for, scales them down if they're wider than your chosen limit, and writes them out as JPG or PNG. The frames are packed into one zip and you get a single download.

Each image is named after where it came from, like frame-0012-01m05.5s.jpg. That's frame 12, taken at one minute and five and a half seconds. Sort the folder by name and they're in order. Need to go back to the video and grab the moment next to one of them? You already know the timestamp.

Every few seconds, or a set number of frames

There are two ways to choose frames, and they suit different jobs.

One frame every few seconds

Pick a gap from half a second up to a minute. This is what you want for a lecture recording, a long screen capture or dashcam footage, where you want a regular sample and the total count doesn't matter much. A ten minute talk at one frame every 5 seconds gives you 121 images.

A set number of frames, spread evenly

Type how many you want and they're spaced evenly between your start and end. Ask for 24 from a two minute clip and you get one every five seconds. Ask for 24 from a four second clip and you get six per second. This is the better mode when you're building a contact sheet, a storyboard or a grid for a client and you need exactly that many pictures.

Want a single still? Set the mode to a set number, type 1, and put the start time on the frame you want. You get one image from that exact point.

JPG or PNG?

Already pulled PNG frames and the folder is too heavy to send? The PNG to JPG converter shrinks them without going back to the video.

JPG for almost everything. At the quality we use you won't see a difference on a normal photo or video frame, and the files are five to ten times smaller. That's why JPG runs allow up to 300 frames and PNG runs stop at 120.

PNG is worth it when you're going to edit the frames, when the video is a screen recording with sharp text, or when the images feed into a model or a measuring tool where every pixel matters. Keep in mind the video itself was already compressed, so PNG can't bring back detail that the camera or the encoder threw away. It just doesn't lose any more.

Picking a width

The width setting is a ceiling, not a target. A 4K video set to 1280 comes out at 1280 pixels wide, with the height worked out so nothing is squashed. A 640 pixel video set to 1920 stays at 640, because blowing a small frame up only makes it blurry and bigger. 1280 is a good default. Go to 1920 if you're printing or cropping in close, and 480 or 640 if the frames are going into a slide or a web page.

What happens to your video

If your file is over the upload limit, run it through the video compressor first. Frames from a compressed copy still look fine at 1280 pixels.

The upload sits in a temporary folder only while the frames are being pulled. As soon as the zip is built, the original video is deleted. If anything goes wrong, it's deleted then too. The zip itself is cleared from the server shortly after you download it. No account, no watermark on the images, and nobody looks at your files.

FFmpeg only opens real video containers here (MP4, MOV, M4V, MKV, WebM and AVI). A file that just has a video extension stuck on it gets turned away instead of being processed.

Where people actually use this

  • Bug reports and docs: grab the three frames from a screen recording that show the problem, with timestamps a developer can jump straight to.
  • Teaching: turn a recorded lecture into one image per slide change for students who'd rather skim than watch an hour of video.
  • Sports and motion: split a golf swing or a sprint start into 30 evenly spaced frames and look at them side by side.
  • Photogrammetry and 3D scans: walk around an object with your phone, then pull a frame every half second to feed into a scanning app.
  • Thumbnails: take 20 candidates from a clip and pick the one where nobody is mid-blink.

When you want motion, not stills

For that, the MP4 to GIF converter turns a few seconds of the same video into a looping GIF with its own colour palette.

Sometimes a row of stills isn't what the job needs, and a short looping clip says it better. If you're posting a reaction or a quick product demo, a GIF is often the better answer than a folder of images.

Where this falls short

It's honest to say what it won't do. It won't give you every single frame of a long video, because a minute of 30 fps footage is 1,800 images and the zip would be enormous. If you truly need every frame, pick a short start and end range and use the set number mode, or run FFmpeg on your own machine. It also doesn't pull frames from YouTube or other links. You need the video file itself. And it can't make a blurry frame sharp: if the camera moved during that moment, the frame will show it.

For everything else, from one still to a few hundred evenly spaced shots, it should take less time than reading this paragraph did.

Video to Frames FAQ

Similar tools to explore

Video Compressor

Make a video small enough for email, Discord or WhatsApp. Pick a quality level or type the size you need in MB, and get an MP4 back with no watermark.

Compress Video

MOV to MP4 Converter

Turn iPhone and QuickTime MOV files into MP4. If the video is already H.264 it's copied across in seconds with zero quality loss, and only re-encoded when it has to be.

Convert to MP4
GIF

MP4 to GIF Converter

Cut a clip of up to 15 seconds from any MP4, MOV or WebM and turn it into a looping GIF with its own colour palette, so it doesn't come out grainy or blotchy.

Convert to GIF

Extract Images from PDF

Pull every image out of your PDF document in their original quality. Get photos, graphics, charts, and logos as separate downloadable files.

Extract Images
PDF

PDF to JPG Converter

Render every page of your PDF as a JPG image and download them all in one ZIP. Free, no signup, and your file is deleted as soon as the conversion finishes.

Convert to JPG
MP4 MP3

MP4 to MP3 Converter

Extract high-bitrate MP3 audio tracks from MP4 video files with preserved audio fidelity and ID3 metadata.

Convert to MP3